Help with Motorized set Up

[stubby]

Help
Im new
I have sv hd 8000
Universal LNB
33 cm Fortec dish on sg1200 motor
Set up dish on wall
not sure of where to go next with the reciever programing
Is there a FAQ anywhere that can help me
Im trying to get 91 110 118 119 129 to take advantage of the HD on the 8000

Any help is apreciated

Thanks

[ladderguy]

My setup is almost the same.

The easiest way is to use URSL's for your motor setup. No need to program in sat's, they are known. If you are already properly aligned with the motor, you just need to turn motor on in the setup, and set for URSL.

To calibrate alignment (assuming plumb and correct latitude/elevation angles) I recommend motoring to the URSL for a known bird (like N2), then rotate mount east/west till known bird (like N2) signal is strong. The rest in the sky arc should fall in automatically.

Once you scan in channels, the motor will automatically move to appropriate sat when you select a channel.

....LG

[stubby]

Thanks LG

I will give that a try tonight

Cant wait to get back up that Ladder