lost 119 after upgrade on duo

[satfan68]

Hi there.
I read all of the posts on the site, but none seem to pertain to the problem that I am having.

I upgraded the factory file to 5.13 as bootloader file and then added 2.41 as bootloader as well and then added patch 0701.1951

I then went to menu diseqc setting and re-did all of the settings for 110 and 119 that I wrote down.

I then re-scanned the satellites and I didn't get any 119 channels.

I even tried changing the diseqc switch for another one that I have and still have the same problem.

I even tried the auto feature on the channel scan and it didn't pick up anything. I get an 80 Strength and no Quality, but 110 has 95 strength and 95 quality.

Any help would be appreciated.
110 as diseqc 1 = 119 as diseqc 2

[cmorTV™]

Is it a dishpro LNB. If so switch 119 to 1 and 110 to 2. press on 11250 in diseaq settings and set 1 to dishpro 1/ and 110 the dishpro 1 too. Then scan

[satfan68]

Sorry about that, forgot to mention that it is two seperate LNB's (Legacy's I think)

[COOLFRENC]

Can u give us ur settings u have for the sat that u lost and any other info like dish/lnb u are using...what kinda switch or switches

[satfan68]

After some re-reading of every post in site instead of just in conaxsat, I found my problem was with the TP frequency. Was trying to get 119 with 110 frequency of 12224 instead of 12239.

Thanks for all the help, I appreciate it and this site rocks. F***tv help with conaxsat lags compared to this site.

LIVEFTA 4 LIFE

[motaznofal]

yessss you are a genious i put it on 12239 and i get full signal but the problem is i wont save it says its saving but then i go back and its the same dam thing, now i changing it in "channel search" is that right what am i doing wrong

[SweetPete]

12224 is the default t/p when you exit out of the menu it will revert back to 12224 but it will scan 12239

[motaznofal]

thanx for the quick reply but then how the heck do i get it to work i dont get it, it keeps telling me scrambled and nothing coming up but channel 101 works where they advertise DN. whats the problem

[SweetPete]

Make sure auto roll is turned on menu > scroll right to card click to open > then scroll to key works > click to open and make sure auto roll is turned on the channel 200 cnn for dish and channel 500 cnn for bev and let the keys roll can take up to 15 minutes for each provider to roll